DCS C-24W Manual de Instalação descarregar pdf (Página 5)

5. Establish the centerline of the cooktops desired

location. It should be the same as the center or

the overhead ventilation hood.

6. Cut the opening for the following installations:

* Standard countertop installations (See Fig.3).

* Deep counter or island installations (See Fig.4).

NOTE: If the deck is used, the sides or bottom of the cutout

may be solid combustible or non material. If the bottom is

solid, provide 5” x 5” cutout in the left rear corner for the gas

inlet and power cord clearance.

If a solid side cabinet wall exists on one or both sides, you will

need to notch the front corner of the cabinet to match the

counter top notch and to allow clearance for the cooktop front

(See Fig.5).

Wok Front

Flush with cabinets

Wok Front projects

outward from cabinets

(Typical of standard depth cabinetry)

(Minimum of 25-3/8" cabinet depth req'd)

777fig08

CABINET PREPARATION

3/8"

9 1/16"

24"

22 11/16"

Electrical and Gas

Supply.-(

See Figs. 8,

9, 10, 11)

2 X 4 Corner Supports

3/4" min.

23 11/16"

24"

3/4

Counter top backsplash

3/8"

777fig05

FIG. 4

sland Installation

FIG. 3

Standard Installation

FIG. 5

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comentários a estes Manuais

Sem comentários

DCS C-24W Manual de Instalação Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões DCS C-24W