DCS HD30 Manual do Utilizador descarregar pdf (Página 26)

INSTALLATION INSTRUCTIONS

Remote blower electrical connection



Remove the cover from the remote blower, then remove the wiring box cover.



Pull the electrical wiring through the hole in the blower base and secure it

according to local codes using a suitable UL listed strain relief or conduit fitting

(not included).



Connect the N (neutral) wire to the white wire in the wiring box with twist-on

connector Fig.28.



Connect the L1 (live) wire to the black wire in the wiring box with twist-on

connector Fig.28.



Connect the green power supply ground wire to the green ground screw.

Attention – verify that the main filter, flap and wiring box cover are positioned

correctly with wiring clearance.



Replace the wiring box cover and screws taking care not to pinch the wiring

under the wiring box cover.



Reinstall the remote blower cover.

Ground screws

GREEN -YELLOW

WHITE

BLACK

Motor wiring

Twist-on connectors

Downdraft wiring

GND (ground)

N (neutral)

L1 (live)

Fig.28

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Sem comentários

DCS HD30 Manual do Utilizador Página 26