DCS RF24D Manual de Serviço descarregar pdf (Página 12)

INSTALLATION

ANTITIP INSTALLATION INSTRUCTIONS

2.14 WALL MOUNT

1. Remove the bracket from its original shipping position on the back of the

unit (Fig. 2.9 and 2.10).

2. Reattach the bracket to the back of the unit using the existing screws from

the unit’s back panel (Fig 2.11).

3. Push the unit against the wall so the bracket is flush with the wall

adjacent to the back panel.

4. Using a pencil and the bracket as a template, trace the bracket on the

wall, making sure 2 of the screw holes are aligned with a stud in the

wall.

5. Pull the unit away from the wall.

6. Remove the screws that connect the upper and lower sections of the

Anti-Tip Bracket. Mount the lower section of the bracket that is not

attached to the unit to the wall where you had marked and drilled pilot

holes in the wall/wall stud for mounting. Attach the lower bracket to

wall.

7. Push the unit back against the wall and align the upper section with

the lower section of the Anti-Tip Bracket such that you can refasten the

original screws that secure the upper and lower sections of the Anti-Tip

Bracket (Fig. 2.12). Your installation is now complete.

Figure 2.9

Figure 2.10

Figure 2.12

Figure 2.11

To Drawer

Refrigerator

To wall

SIDE VIEW

Adjacent wall

Drawer Refrigerator

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Sem comentários

DCS RF24D Manual de Serviço Página 12