DCS WDU models Especificações descarregar pdf (Página 303)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#STIA - SIM Tookit Interface Activation

<text> - (optional) text to be displayed to user

In these cases neither #STGI nor #STSR commands are

required:

 AT#STGI is accepted anyway.

 AT#STSR=<cmdType>,0 will answer OK but do nothing.

In case of SEND SHORT MESSAGE (<cmdType>=19) command if

sending to network fails an unsolicited notification will be sent

#STN: 119

if <cmdType>=33 (DISPLAY TEXT)

an unsolicited notification will be sent if allowed by SIM (see 3GPP TS

31.114):

#STN: <cmdType>,<cmdDetails>[,<text>]

where:

<cmdDetails> - unsigned Integer used as a bit field.

0..255 - used as a bit field:

bit 1:

0 - normal priority

1 - high priority

bits 2 to 7: reserved for future use

bit 8:

0 - clear message after a delay

1 - wait for user to clear message

<text> - (optional) text to be displayed to user

In this case:

1. if <cmdDetails>/bit8 is 0 neither #STGI nor #STSR

commands are required:

 AT#STGI is accepted anyway.

 AT#STSR=<cmdType>,0 will answer OK but do nothing.

2. If <cmdDetails>/bit8 is 1 #STSR command is required

if <cmdType>=18 (SEND USSD)

an unsolicited notification will be sent to the user:

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 317 318

Sem comentários

DCS WDU models Especificações Página 303