DCS WDU models Especificações descarregar pdf (Página 80)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+CPWD - Change Facility Password

<oldpwd> - string type, it shall be the same as password specified for the

facility from the ME user interface or with command +CPWD.

<newpwd> - string type, it is the new password

Note: parameter <oldpwd> is the old password while <newpwd> is the ne

one.

AT+CPWD=? Test command returns a list of pairs (<fac>,<pwdlength>) which presents

the available facilities and the maximum length of their password

(<pwdlength>)

Example at+cpwd=?

+CPWD: ("SC",8),("AB",4),("P2",8)

Reference 3GPP TS 27.007

3.5.4.3.7. Calling Line Identification Presentation - +CLIP

+CLIP - Calling Line Identification Presentation

AT+CLIP=[<n>]

Set command enables/disables the presentation of the CLI (Calling Line

Identity) at the TE. This command refers to the UMTS supplementary

service CLIP (Calling Line Identification Presentation) that enables a called

subscriber to get the CLI of the calling party when receiving a mobile

terminated call.

Parameters:

<n>

0 - disables CLI indication (factory default)

1 - enables CLI indication

If enabled the device reports after each RING the response:

+CLIP: <number>,<type>,””,128,<alpha>,<CLI_validity>

where:

<number> - string type phone number of format specified by <type>

<type> - type of address octet in integer format

128 - both the type of number and the numbering plan are unknown

129 - unknown type of number and ISDN/Telephony numbering plan

145 - international type of number and ISDN/Telephony numbering plan

(contains the character "+")

<alpha> - string type; alphanumeric representation of <number>

corresponding to the entry found in phonebook; used character

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 317 318

Sem comentários

DCS WDU models Especificações Página 80